科研项目

装备自动化方向 
2014-2016     上海市科委重点项目子课题：“面向飞机装配的机器人制孔多功能末端执行器研制”，负责人 
2011－2012    国家商用飞机制造工程技术研究中心创新基金“大厚度复合材料/钛合金组合结构一体化连接制孔技术” 负责人 
2010－2011    机械系统与振动国家重点实验室开放课题“面向民机装配层叠薄壁结构群孔精密高效自动化加工方法研究”，负责人 
2009-2011     上海市科委重点项目子课题“面向工程机械制造业产品服务的信息化技术的研究及应用”， 负责人 
2009－2011    上海市民机创新工程子课题“飞机装配柔性制孔装备与研究平台建设”，第二承担人 
2009－2012    中国商飞大型客机关键技术攻关课题“大型客机总装密封性能先进检测与功能模拟试验技术研究”，第二承担人

代表性论文专著

2014 
1.Hu, Y.X, Li, Z., Li, K.M, Yao, Z.Q. Predictive Modeling and Uncertainty Quantification of Laser Shock Processing by Bayesian Gaussian Processes With Multiple Outputs. Journal of Manufacturing Science and Engineering, 2014. 136(4), 041014. 
2013 
2.A. Vasu, Y.X Hu, R.V. Grandhi, Differences in plasticity due to curvature in laser peened components, Surface and Coatings Technology, 235 (2013) 648-656. 
3.K.M. Li., Y.X. Hu, Z.Q. Yao. Experimental study of micro dimple fabrication based on laser shock processing. Optics & Laser Technology, 2013, 48: 216-225. 
4.姚振强, 胡永祥. 基于短脉冲激光束干涉的硅表面亚微米结构加工工艺. 机械工程学报， 2013, 49(6): 122-128 

2012 
1.Y.X. Hu, R.V. Grandhi. Efficient numerical prediction of residual stress and deformation for large-scale laser shock processing using the eigenstrain methodology. Surface and Coatings Technology, 2012, 206(15): 3374-3385. 
2.Yongxiang Hu, Kangmei Li, Chenjie Qi, Zhenqiang Yao, Ramana V. Grandhi. Size effect on indentation depth of oxygen-free high purity copper induced by laser shock processing. Transactions of Nonferrous Metals Society of China 22(2012) s573−s578 
2011 
1. Y.X Hu, Z. Yao, X. Xu. Experimental Investigation on the Bending Deformation of thin 1060 Pure Aluminum Sheet by Laser Peen Forming. In: Champaigne J, ed, The 11th International Conference on Shot Peening, South Bend, Indiana, USA, 2011: 341-346 
2010 
1.Yongxiang Hu, Xiaoxia Xu, Zhenqiang Yao, and Jun Hu. Laser peen forming induced two way bending of thin sheet metals and its mechanisms. Journal of Applied Physics, 2010, 108(7): 073117.1-073117.7 
2.Yongxiang Hu, Yefei Han, Zhenqiang Yao, and Jun Hu. Three-Dimensional Numerical Simulation and Experimental Study of Sheet Metal Bending by Laser Peen Forming. Transactions of ASME, Journal of Manufacturing Science and Engineering, 2010, 132(6): 061001.1-061001.10